Jumat, 26 Oktober 2012

Pengertian PBAX


Pengertian PABX

Private Automatic Branch Exchange (PABX) merupakan istilah lama dari Private Branch Exchange (PBX).
Disingkat dengan PBX, dulu disebut dengan PABX (Private Automatic Branch Exchange). Peralatan ini berfungsi untuk memaksimalkan fungsi telepon di perusahaan. Dengan adanya PBX ini akan memudahkan berbagai bagian bagian pada suatu kantor dari panggilan telepon yang masuk. Masing-masing bagian pada kantor tersebut diberikan nomor extension. Sehingga jika ada telepon masuk dari luar untuk menghubungi bagian yang berbeda , maupun gedung yang berbeda cukup dengan menghubungi suatu nomor yang diperkenalkan oleh perusahaan, kemudian panggilan tersebut akan diteruskan berdasarkan nomor extension yang dituju.Selain itu masing-masing bagian juga bisa saling berkomunikasi antar mereka dengan menuju nomor ekstension ini.

Votel Innovation PABX

PABX adalah Alat Penyambung (Switch) untuk mengatur komunikasi telpon masuk dan telpon keluar secara efisien dan efektif di Kantor, Ruko, Rukan, Rumah besar/bertingkat, Asrama, Kost, dan bangunan lainnya.

PABX merupakan sebuah sentral kecil yang digunakan di dalam suatu lingkungan terbatas, yang merupakan pusat dari suatu jaringan peripheral peralatan komunikasi. Jumlah sambungan (extension) yang dapat dikelola tergantung dari kapasitas PABX itu sendiri. Untuk menghubungkan extension dengan pelanggan yang berada di luar PABX, pada PABX dilengkapi dengan trunk. Umumnya dipasang pada kantor-kantor, hotel, rumah sakit atau pabrik pabrik yang memakai telepon sebagai sarana komunikasi untuk hubungan antar ruangannya. Masing-masing pesawat telepon tidak secara langsung tersambung pada sentral pusat, tetapi melalui PABX. Secara garis besar terdapat dua level PABX, yaitu PABX pada level Trunk dan PABX pada level pelanggan. PABX level Trunk dihubungkan ke sentral dengan empat kawat kecepatan tinggi untuk melewatkan sinyal digital, dan PABX ini sudah dapat melaksanakan sebagian besar tugas-tugas dari sentral. Sementara PABX pada level pelanggan terhubung ke sentral dengan dua kawat analog seperti pesawat telepon biasa. Ada beberapa perangkat keras sebagai pendukung system PABX. Masingmasing perangkat tersebut saling mendukung antara satu dengan yang lainnya.
Perangkat tersebut biasanya disebut sebagai sub sistem atau modul. Dan yang menghubungkan antara modul satu dengan yang lain adalah merupakan induk dari modul-modul tersebut sehingga mereka bisa menjadi suatu sistem yang teratur dan terkoordinasi. Induk penghubung ini adalah Motherboard atau Blackplane. Semua proses penyambungan akan melalui Motherboard. Kondisi yang terjadi seperti: interfacing dengan UP-BUS, pengintegrasian ke seluruh modul dengan ST BUS dan interfacing dengan outlet dilakukan pada Motherboard.

Fungsi Dari PABX
Pada dasarnya semua PABX digital mempunyai grup fungsional yang sama, tapi fungsi-fungsi tersebut diterapkan dan diatur dalam jalan yang berbeda dalam sistem yang bervariasi. fungsi PABX sebagai sistem penyambungan telepon untuk mengatur proses penyambungan komunikasi telepon.

Jaringan Packet Switching & Circuit Switching

1. Jaringan Circuit Switching

Jaringan circuit switching digunakan untuk menghubungkan pasangan terminal dengan cara menyediakan sirkuit atau kanal yang tersendiri dan terus meneurs selama hubungan berlangsung :
  • Sirkuit yang ‘holded’ tidak dapat dipakai oleh yang lain
  • Jumlah sirkuit / kanal lebih kecil dibandingkan kapasitas
Jaringan circuit switching, kinerjanya tergantiung pada loss bukan pada delay (tetapi pada digital switching juga menimbulkan delay).
Tiga fase yang terdapat dalam circuit switching, yaitu;
  1. circuit establishment
  2. data transfer
  3. circuit termination
Jaringan circuit switching digunakan untuk hubungan yang bersifat :
  • Real time-spech (ex : telpon)
  • Real time-data very high bit transmitted
Contoh :
  • Jaringan Telepon
  • ISDN (Integrated Services Digital Networks)

B. Jaringan Packet Switching

Sebuah metode yang digunakan untuk memindahkan data dalam jaringan internet. Dalam packet switching, seluruh paket data yang dikirim dari sebuah node akan dipecah menjadi beberapa bagian. Setiap bagian memiliki keterangan mengenai asal dan tujuan dari paket data tersebut. Hal ini memungkinkan sejumlah besar potongan-potongan data dari berbagai sumber dikirimkan secara bersamaan melalui saluran yang sama, untuk kemudian diurutkan dan diarahkan ke rute yang berbeda melalui router.
Packet Switching tidak mempergunakan kapasitas transmisi yang melewati jaringan. Data dikirim keluar dengan menggunakan rangkaian potongan-potongan kecil secara berurutan yang disebut paket. Masing-masing paket melewati jaringan dari satu titik ke titik lain dari sumber ke tujuan Pada setiap titik seluruh paket diterima, disimpan dengan cepat dan ditransmisikan ke titik berikutnya.
Fungsi utama dari jaringan packet-switched adalah menerima paket dari stasiun pengirim untuk diteruskan ke stasiun penerima.
Penggunaan packet switching mempunyai keuntungan dibandingkan dengan penggunaan circuit switching antara lain:
  1. Efisiensi jalur lebih besar karena hubungan antar node dapat menggunakan jalur yang dipakai bersama secara dinamis tergantung banyaknya paket yang dikirim.
  2. Bisa mengatasi permasalahan data rate yang berbeda antara dua jenis jaringan yang berbeda data rate-nya.
  3. Saat beban lalu lintas meningkat, pada model circuit switching, beberapa pesan yang akan ditransfer dikenai pemblokiran. Transmisi baru dapat dilakukan apabila beban lalu lintas mulai menurun. Sedangkan pada model packet switching, paket tetap bisa dikirimkan, tetapi akan lambat sampai ke tujuan (delivery delay meningkat).
  4. Pengiriman dapat dilakukan berdasarkan prioritas data. Jadi dalam suatu antrian paket yang akan dikirim, sebuah paket dapat diberi prioritas lebih tinggi untuk dikirim dibanding paket yang lain. Dalam hal ini, prioritas yang lebih tinggi akan mempunyai delivery delay yang lebih kecil dibandingkan paket dengan prioritas yang lebih rendah.
Penggunaan Paket Switching :
Contoh- contoh applikasi packet switching :
  1. TCP/IP protokol adalah jaringan dengan teknologi “packet switching” yang berasal dari proyek DARPA (development of Defense Advanced Research Project Agency) di tahun 1970-an yang dikenal dengan nama ARPANET.
  2. Jaringan ATM adalah jaringan Packet-switching karena konsep ATM mirip dengan konsep yang digunakan packet-switching yaitu transfer informasi dilakukan dalam format sel (informasi yang akan dikirim dibagi menjadipotongan-potongan dengan ukuran tertentu) yang sifatnya connection-oriented artinya sebelum transfer informasi dilakukan harus dibangun hubungan terlebih dahulu atau definisikan sebagai protokol yang berfungsi sebagai interface (baca: antarmuka) untuk menghubungkan komputer dengan komputer lainnya, membuat tiap komputer yang terintegrasi di dalamnya dapat bercakapcakap atau bertukar informasi dengan kecepatan tinggi(sampai dengan 155Mbps).
  3. GPRS adalah teknologi packet Switching data pada GSM. Teknologi yang dikenal sebagai generasi 2.5 ini, merupakan pengembangan dari teknologi Circuit Switching pada
  4. GSM. Berbeda dengan teknologi Circuit Switching, pada GPRS koneksi ke jaringan hanya dilakukan pada saat mengirimkan data. Data tersebut dikirim sekaligus dalam satu ´paket´, sehingga lebih efisien dibanding koneksi permanen pada teknologi circuit-switching. Sehingga biaya yang dibebankan pun, jauh lebih murah. Selain itu kecepatan transmisi datanya jauh lebih cepat, yaitu sampai 115 Kilobyte per second(Kbps). Padahal, sebelumnya kemampuan transmisi data pada GSM hanya 9,56 Kbps.

Teknologi LAN

Pada awalnya teknologi LAN telah berkembang secara terpisah-pisah berdasar industri yang mengembangkannya. Teknologi LAN yang banyak digunakan saat ini yaitu;
Ethernet / Fast Ethernet (CSMA/CD) /Wireless Ethernet /Gigabite Ethernet
1. Token Ring / FDDI
2. 100VG-Any LAN
3. Wireless LAN
5. ATM LAN (LANE , LAN Emulator)
6. GigabitEthernet
    dll.
 
Teknologi Jaringan Lokal Ethernet bedasar laju transmisi data dapat dikategorikan 10MBPS Ethernet dan 100MBPS. Ethernet 10MBPS bedasar media transmisi yang digunakan ada beberapa jenis yaitu 10 Base 2, 10 Base 5, 10 Base T, dan 10 Broad 36. Ethernet 100MBPS sering disebut sebagai FAST LAN, media transmisi yang digunakan dapat menggunakan jenis kabel Twisted-wire-pair maupun Fiber Optic. Gigabit Ethernet merupakan generasi terakhir dengan laju data 1Gbps. Wireless Ethernet adalah merupakan non guide media (atau dengan media udara/radio).
Pembangunan jaringan Ethernet perlu memperhatikan/pertimbangan teknologi yang digunakan, yaitu pemilihan Medium transmisi, NIC (Network Interface Card) atau LAN Card, Frame Ethernet(MAC), DRIVER, Piranti jaringan (HUB, SWITCH HUB).
Teknologi suatu LAN meliputi pertimbangan-pertimbangan teknis seperti Jenis medium transmisi yang digunakan, Jenis Konektor yang digunakan, Jenis Encoding/Decoding yang digunakan, Mode transmisi baseband/broadband yang digunakan, Kendali akses medium (MAC) yang digunakan, ataupun Pertimbangan kinerja jaringan (perfomans).
Gigabit Ethernet merupakan pengembangan standar Ethernet IEEE 802.3. Salah satu aspeknya pengembangannya adalah kecepatan transmisi dari 10 Mbps (Ethernet) ke 100 Mbps (Fast Ethernet) dan saat ini 1000 Mbps pada (Gigabit Ethernet).
Teknologi Ehternet menggunakan format dan ukuran paket yang sama maka bila dilakukan pengembangan jaringan (upgrade) tidak diperlukan perubahan pada jaringan Ethernet yang telah ada.
Untuk mencapai kecepatan 1 Gbps, diperlukan beberapa perubahan pada komponen antarmuka fisik. Gigabit Ethernet merupakan penggabungan dua teknologi standar IEEE 802.3 Ethernet dan ANSII X3T11 Fibre Channel yang berkecepatan tinggi, seperti diperlihatkan pada gambar berikut. Format yang digunakan adalah IEEE 802.3 Ethernet dan memiliki kemampuan transfer secara full duplex maupun half duplex dengan methode kendali akses CSMA/CD.
Implementasi perkabelan Gigabit Ethernet berdasar standar teknologi terbaru IEEE 802.3z:1000Base-SX(untuk multimode fiber optic), 1000Base-LX (untuk single mode fiber optic), 1000Base-CX (untuk twinax), dan 1000Base-T (untuk unshielded twisted pair copper).

Pengertian FRAME RELAY DATA

Frame Relay adalah protokol WAN yang beroperasi pada layer pertama dan kedua dari model OSI, dan dapat diimplementasikan pada beberapa jenis interface jaringan. Frame relay adalah teknologi komunikasi berkecepatan tinggi yang telah digunakan pada ribuan jaringan di seluruh dunia untuk menghubungkan LAN, SNA, Internet dan bahkan aplikasi suara/voice.
Frame relay adalah cara mengirimkan informasi melalui wide area network (WAN) yang membagi informasi menjadi frame atau paket. Masing-masing frame mempunyai alamat yang digunakan oleh jaringan untuk menentukan tujuan. Frame-frame akan melewati switch dalam jaringan frame relay dan dikirimkan melalui virtual circuit sampai tujuan.

Fitur Frame Relay
 
Beberapa fitur frame relay adalah sebagai berikut:
  1. Kecepatan tinggi
  2. Bandwidth Dinamik
  3. Performansi yang baik/ Good Performance
  4. Overhead yang rendah dan kehandalah tinggi (High Reliability)
Perangkat Frame Relay

Sebuah jaringan frame relay terdiri dari endpoint (PC, server, komputer host), perangkat akses frame relay (bridge, router, host, frame relay access device/FRAD) dan perangkat jaringan (packet switch, router, multiplexer T1/E1). Perangkat-perangkat tersebut dibagi menjadi dua kategori yang berbeda:
  • DTE: Data Terminating Equipment
DTE adalah node, biasanya milik end-user dan perangkat internetworking. Perangkat DTE ini mencakup endpoint dan perangkat akses pada jaringan Frame Relay. DTE yang memulai suatu pertukaran informasi.
  • DCE: Data Communication Equipment
DCE adalah perangkat internetworking pengontrol carrier. Perangkat-perangkat ini juga mencakup perangkat akses, teatpi terpusat di sekitar perangkat jaringan. DCE merespon pertukaran informasi yang dimulai oleh perangkat DTE.
 

Virtual Circuit (VC) Frame Relay

Pengantar Virtual Circuit (VC)

Suatu jaringan frame relay sering digambarkan sebagai awan frame relay (frame relay cloud), karena jaringan frame relay network bukan terdiri dari satu koneksi fisik antara endpoint dengan lainnya, melainkan jalur/path logika yang telah didefinisikan dalam jaringan. Jalur ini didasarkan pada konsep virtual circuit (VC). VC adalah dua-arah (two-way), jalur data yang didefinisikan secara software antara dua port yang membentuk saluran khusur (private line) untuk pertukaran informasi dalam jaringan.Terdapat dua tipe virtual circuit (VC):
  • Switched Virtual Circuit (SVC)
  • Permanent Virtual Circuit (PVC)

Cara Kerja ATM (asynchronous transfer mode)

A. Pengertian AsynchronusTransfer Mode (ATM)

Asynchronous Transfer Mode (disingkat ATM) adalah protokol jaringan yang berbasis sel, yaitu paket-paket kecil yang berukuran tetap (48 byte data + 5 byte header). Protokol lain yang berbasis paket, seperti IP dan Ethernet, menggunakan satuan data paket yang berukuran tidak tetap. Kata asynchronous pada ATM berarti transfer data dilakukan secara asinkron, yaitu masing2 pengirim dan penerima tidak harus memiliki pewaktu (clock) yang tersinkronisasi. Metode lainnya adalah transfer secara sinkron, yang disebut sebagai STM (Synchronous Transfer Mode). Teknologi yang dipilih untuk membawa layanan B-ISDN dan Teknologi Asyncronous Transfer Mode (ATM) saat ini memasuki operasional pelayanan secara penuh dan merupakan satu teknologi yang menjadi dasar pembuatan jaringan-jaringan yang baru. ATM menyediakan teknologinya untuk membangun jaringan yang cocok bagi kebutuhan konsumen mereka, kombinasi kemampuan, pengaturan dan kapasitas untuk membawa jalur lain seperti Frame Ralay atau X.25 dan segala protokol seperti Internet Protocol (IP). Ini merupakan berita baik untuk perusahaan besar dengan hubungan fiber yang langsung tetapi kantor cabang atau kantor kecil yang tergantung pada jasa kantor telepon yang selama ini kurang beruntung.

Sekarang dengan perpaduan ATM dengan asymmetric digital subscriber loop (ADSL ) menjadi standart yang diakui, perusahaan kecil mempunyai prospek terhadap akses langsung ATM dan merupakan salah satu teknologi yang memberikan pelayanan yang sangat cepat melalui jalur kabel standart. Teknologi ini dapat menghubungkan banyak pelanggan yang berada di berbagai tempat.

B. Konsep Dasar AsynchronusTransfer Mode (ATM)

ATM adalah suatu mode transfer yang berorientasi pada bentuk paket y ang spesifik, dengan panjang tetap, berdasarkan system Asynchronous Time Division Multiplexing(ATDM), menggunakan format dengan ukuran tertentu yang disebut sel. Informasi yang terdapat didalam sel ditransmisikan dalam jaringan setelah Sebelumnya ditambahkan header diawal sel yang berfungsi sebagai routing dan control sel.
ATM bersifat service independence semua service (suara, data serta gambar/citra) dapat ditransmisikan melalui ATM dengan cara penetapan beberapa tipe ATM Adaptation Layer (AAL) . AAL berfungsi mengubah format informasi yang asli kedalam format ATM sehingga dapat ditransmisikan. ATM dapat diimplementasikan di jaringan yang ada sekarang dengan tiga cara, diurut dari yang paling mudah ke yang paling sukar adalah Native ATM APIs, Classical IP dan Address Resolution Protocol dan LANE Native ATM APIs.

Classical IP dibatasi untuk jaringan yang menggunakan protocol TCP/IP. Sedangkan LANE dapat menggunakan protokol apa saja. LANE beroperasi di lapisan kedua dari OSI, yaitu lapisan link data. LANE mengizinkan aplikasi dan protokol yang ada saat ini beroperasi tanpa perubahan saat diterapkan ATM. Ini berarti perusahaan tidak perlu membuang/mengganti aplikasi dan infrastruktur jaringan yang telah ada. Sedangkan kebanyakan jaringan memiliki beberapa protokol saat mengimplementasikan ATM. Akibatnya banyak perusahaan di Amerika Serikat yang menggunakan ATM.

Pada ATM seluruh informasi yang akan ditransfer akan dibagi menjadi slot-slot dengan ukuran tetap yang disebut cell. Ukuran cell pada ATM adalah 53 octet (1 octet =8 bits) yang terdiri dari :
Ø 48 octet untuk filed informasi, dan
Ø 5 octet untuk heaDER.
Ø ATM memiliki karakteristik umum sebagai berikut :
Pada basis link demi link tidak menggunakan proteksi error dan flow control.
Pada ATM proteksi error dapat diabaikan karena didasarkan saat ini link demi link dalam network memiliki kualitas yang sangat tinggi, sehingga memiliki BER yang sangat kecil. Dan error control cukup dilakukan end to end saja.Flow control juga tidak dilakukan dalam ATM network karena dengan pengaturan alokasi resource dan dimensioning queue yang tepat maka kejadian queue overflow yang menyebabkan paket loss dapat ditekan. Sehingga probabilitas packet loss antara 10-8 sampai dengan 10-12 dapat dicapai.

Ø ATM beroperasi pada connection oriented mode
Sebelum informasi ditransfer dari terminal ke network, sebuah fase setup logical / virtual connection harus dilakukan untuk menyediakan resource diperlukan. Jika resource tersedia tidak mencukupi maka connection dari terminal akan dibatalkan. Jika fase transfer informasi telah selesai, maka resource yang telah digunakan akan dibebabskan kembali. Dengan menggunakan connection-oriented ini akan memungkinkan network untuk menjamin packet loss yang seminim mungkin.

Ø Pengurangan fungsi header
Untuk menjamin pemrosesan yang cepat dalam network, maka ATM header hanya memiliki fungsi yang sangat terbatas. Fungsi utama dari header adalah untuk identifikasi virtual connection (virtual connection identifier =VCI) yang dipilih pada saat dilakukan call setup dan menjamin routing yang tepat untuk setiap paket didalam network serta memungkinkan multiplexing dari virtual connection – virtual connection berbeda melalui satu link tunggal.

Ø Selain fungsi VCI, sejumlah fungsi lain yang sangat terbatas juga dilakukan oleh header, terutama terkait dengan fungsi pemeliharaan. Karena fungsi header diabatasi, maka implementasi header processing dalam ATM node sangat mudah / sederhana dan dapat dilakukan pada kecepatan yang sangat tinggi (150 Mbps sampai 2.5 Gbps) dan hal ini akan menyebabkan processing delay dan queuing delay yang rendah.

Ø Panjang filed informasi dalam satu cell relatif kecil

Ø Hal ini dilakukan untuk mengurangi ukuran buffer internal dalam switching node, dan untuk membatasi queuing delay yang terjadi pada buffer tersebut. Buffer yang kecil akan menjamin delay dan delay jitter rendah, hal ini diperlukan untuk keperluan service-service real time.

C. Keuntungan AsynchronusTransfer Mode (ATM)

Ø ATM mampu menangani semua jenis trafik komunikasi (voice, data, image, video, suara dengan kecepatan tinggi, multimedia dans ebagainya) dalam satu saluran dan dengan kecepatan tinggi)

Ø ATM dapat digunakan dalam Local Area Network dan Wide Area Network (WAN)

Ø Dalam pembangunan LAN, penggunaan ATM dapat menghemat biaya karena Pemakai yang akan menghubungkan dirinya dengan system ATM LAN dapat menggunakan adapter untuk menyediakan kecepatan transmisi sesuai dengan bandwidth yang mereka butuhkan.
Sel-selATM terdiri dari:
5 byte HEADER dan 48 byte INFORMASI
UNI cell ATM terdiri dari: GFC, VPI, VCI, PT, CLP, HEC dan informasi
NNI cell ATM terdiri dari: VPI, VCI, PT, CLP, HEC dan informasi
  • GFC = Generic Flow Control (4 bits) (default: 4-bit nol) digunakan untuk mengontrol aliran sel dari user-jaringan
  • VPI = Virtual Path Identifier (8 bit Uni) atau (12 bits NNI) merupakan bidang routing untuk jaringan
  • VCI = Virtual channel identifier (16 bits) digunakan untuk routing ke dan dari pemakai ujung
  • PT = Tipe payload (3 bits) menunjukkan jenis-jenis informasi
  • CLP = Cell Loss Priority (1-bit) menyediakan bimbingan kepada jaringan saat terjadi kemacetan
  • Hec = Header Error Control (8-bit CRC, jumlahnya banyak = X 8 + X 2 + X + 1)
    digunakan untuk mendeteksi kesalahan. Dan membetulkan kode sehingga memberikan perlindungan terhadapkesalahan dalam jaringan.
Peralatan AsynchronusTransfer Mode (ATM)

Jaringan ATM terdiridari : switch ATM dan titik ujung ATM Switch ATM bertanggung jawab untuk transit sel melalui jaringan ATM. Tugas switch ATM : menerima sel dari titik ujung ATM atau switch ATM yang lain, membaca, meng-update informasi header dari sel dan men-switch ke arah tujuan.
Tugas titik ujung ATM : sebagai adapter bagi jaringanATM. Contoh: workstation, router, LAN switch, video CODEC, Digital Service Unit (DSU).

Atm Layer

ATM layer merupakan layer diatas physical layer yang memiliki karakteristik yang independent terhadap media fisik yang digunakan. ATM layer melakukan fungsi-fungsi utama sebagai berikut:

Ø Cell multiplexing/demultiplexing, pada arah kirim cell-cell dari VP (Virtual Path) dan VC (Virtual Channel) individual akan dimultiplexing menghasilkan suatu cell stream. Pada sisi terima fungsi cell demultiplexing akan memisahkan cell stream yang diterima menjadi cell flow individual ke VP dan VC terkait.

Ø Translasi VPI dan VCI. Translasi VPI (VP Identifier) dan VCI dilakukan di ATM switching node. Didalam VP node nilai dari VPI field dari setiap incoming cell akan ditranslasikan ke nilai VPI yang baru untuk outgoing cell. Pada VC switch baik nilai VPI maupun VCI akan ditranslasikan ke nilai VPI dan VCI yang baru.

Ø Pembangkitan / pemisahan cell header, fungsi ini diterapkan pada titik-titik terminasi dari ATM layer. Pada arah kirim, pada field informasi yang telah diterima dari AAL ditambahkan ATM cell header (kecuali field HEC) dan nilai VPI serta VCI dari cell header dapat diperoleh dengan melakukan translasi dari SAP (Service Access Point) identifier. Pada arah terima, fungsi pemisahan cell header akan memisahkan cell header , dan hanya filed informasi saja yang diteruskan ke AAL.

Ø Generic Flow Control (GFC). Fungsi GFC hanya digunakan pada BISDN UNI (User Network Interface) saja. GFC digunakan untuk mendukung kontrol dari ATM traffic flow dalam satu customer network dan dapat digunakan untuk mengurangi kondisi-kondisi overload pada UNI. Informasi GFC ditumpangkan dalam assigned cell dan unassigned cell.

Senin, 22 Oktober 2012

KONFIGURASI SAMBA DEBIAN


 Masuk root, kemudian ketik #apt-get install samba
2.       Kemudian akan muncul pop up pilih “no”
3.       Setelah terinstal, kemudian kita konfigurasi sambanya ketikan #nano /etc/samba/smb.conf
4.       Isikan konfigurasi seperti ini :

#
# Sample configuration file for the Samba suite for Debian GNU/Linux.
#
#
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options most of which
# are not shown in this example
#
# Any line which starts with a ; (semi-colon) or a # (hash)
# is a comment and is ignored. In this example we will use a #
# for commentary and a ; for parts of the config file that you
# may wish to enable
#
# NOTE: Whenever you modify this file you should run the command
# "testparm" to check that you have not made any basic syntactic
# errors.
#

#======================= Global Settings =======================

[global]

## Browsing/Identification ###

# Change this to the workgroup/NT-domain name your Samba server will part of
   workgroup = WORKGROUP

# server string is the equivalent of the NT Description field
   server string = %h server

# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable its WINS Server
;   wins support = no

# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
;   wins server = w.x.y.z

# This will prevent nmbd to search for NetBIOS names through DNS.
   dns proxy = no

# What naming service and in what order should we use to resolve host names
# to IP addresses
;   name resolve order = lmhosts host wins bcast

#### Networking ####

# The specific set of interfaces / networks to bind to
# This can be either the interface name or an IP address/netmask;
# interface names are normally preferred
;   interfaces = 127.0.0.0/8 eth0

# Only bind to the named interfaces and/or networks; you must use the
# 'interfaces' option above to use this.
# It is recommended that you enable this feature if your Samba machine is
# not protected by a firewall or is a firewall itself.  However, this
# option cannot handle dynamic or non-broadcast interfaces correctly.
;   bind interfaces only = true



#### Debugging/Accounting ####

# This tells Samba to use a separate log file for each machine
# that connects
   log file = /var/log/samba/log.%m

# Put a capping on the size of the log files (in Kb).
   max log size = 1000

# If you want Samba to only log through syslog then set the following
# parameter to 'yes'.
;   syslog only = no

# We want Samba to log a minimum amount of information to syslog. Everything
# should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log
# through syslog you should set the following parameter to something higher.
   syslog = 0

# Do something sensible when Samba crashes: mail the admin a backtrace
   panic action = /usr/share/samba/panic-action %d


####### Authentication #######

# "security = user" is always a good idea. This will require a Unix account
# in this server for every user accessing the server. See
# /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/ServerType.html
# in the samba-doc package for details.
   security = share

# You may wish to use password encryption.  See the section on
# 'encrypt passwords' in the smb.conf(5) manpage before enabling.
   encrypt passwords = true

# If you are using encrypted passwords, Samba will need to know what
# password database type you are using. 
   passdb backend = tdbsam

   obey pam restrictions = yes

   guest account = endro
   invalid users = root

# This boolean parameter controls whether Samba attempts to sync the Unix
# password with the SMB password when the encrypted SMB password in the
# passdb is changed.
;   unix password sync = no

# For Unix password sync to work on a Debian GNU/Linux system, the following
# parameters must be set (thanks to Ian Kahan < for
# sending the correct chat script for the passwd program in Debian Sarge).
   passwd program = /usr/bin/passwd %u
   passwd chat = *Enter\snew\sUNIX\spassword:* %n\n *Retype\snew\sUNIX\spassword:* %n\n *password\supdated\ssuccessfully* .

# This boolean controls whether PAM will be used for password changes
# when requested by an SMB client instead of the program listed in
# 'passwd program'. The default is 'no'.
;   pam password change = no

########## Domains ###########

# Is this machine able to authenticate users. Both PDC and BDC
# must have this setting enabled. If you are the BDC you must
# change the 'domain master' setting to no
#
;   domain logons = yes
#
# The following setting only takes effect if 'domain logons' is set
# It specifies the location of the user's profile directory
# from the client point of view)
# The following required a [profiles] share to be setup on the
# samba server (see below)
;   logon path = \\%N\profiles\%U
# Another common choice is storing the profile in the user's home directory
;   logon path = \\%N\%U\profile

# The following setting only takes effect if 'domain logons' is set
# It specifies the location of a user's home directory (from the client
# point of view)
;   logon drive = H:
;   logon home = \\%N\%U

# The following setting only takes effect if 'domain logons' is set
# It specifies the script to run during logon. The script must be stored
# in the [netlogon] share
# NOTE: Must be store in 'DOS' file format convention
;   logon script = logon.cmd

# This allows Unix users to be created on the domain controller via the SAMR
# RPC pipe.  The example command creates a user account with a disabled Unix
# password; please adapt to your needs
; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u

########## Printing ##########

# If you want to automatically load your printer list rather
# than setting them up individually then you'll need this
;   load printers = yes

# lpr(ng) printing. You may wish to override the location of the
# printcap file
;   printing = bsd
;   printcap name = /etc/printcap

# CUPS printing.  See also the cupsaddsmb(8) manpage in the
# cupsys-client package.
;   printing = cups
;   printcap name = cups

# When using [print$], root is implicitly a 'printer admin', but you can
# also give this right to other users to add drivers and set printer
# properties
;   printer admin = @ntadmin


############ Misc ############

# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
;   include = /home/samba/etc/smb.conf.%m

# Most people will find that this option gives better performance.
# See smb.conf(5) and /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/speed.html
# for details
# You may want to add the following on a Linux system:
#         SO_RCVBUF=8192 SO_SNDBUF=8192
   socket options = TCP_NODELAY

# The following parameter is useful only if you have the linpopup package
# installed. The samba maintainer and the linpopup maintainer are
# working to ease installation and configuration of linpopup and samba.
;   message command = /bin/sh -c '/usr/bin/linpopup "%f" "%m" %s; rm %s' &

# Domain Master specifies Samba to be the Domain Master Browser. If this
# machine will be configured as a BDC (a secondary logon server), you
# must set this to 'no'; otherwise, the default behavior is recommended.
;   domain master = auto

# Some defaults for winbind (make sure you're not using the ranges
# for something else.)
;   idmap uid = 10000-20000
;   idmap gid = 10000-20000
;   template shell = /bin/bash
;
; The following was the default behaviour in sarge
; but samba upstream reverted the default because it might induce
; performance issues in large organizations
; See #368251 for some of the consequences of *not* having
; this setting and smb.conf(5) for all details
;
;   winbind enum groups = yes
;   winbind enum users = yes

#======================= Share Definitions =======================

[homes]
   comment = Home Directories
   browseable = no

# By default, the home directories are exported read-only. Change next
# parameter to 'yes' if you want to be able to write to them.
   writable = no

# File creation mask is set to 0700 for security reasons. If you want to
# create files with group=rw permissions, set next parameter to 0775.
   create mask = 0700

# Directory creation mask is set to 0700 for security reasons. If you want to
# create dirs. with group=rw permissions, set next parameter to 0775.
   directory mask = 0700

# Restrict access to home directories
# to the one of the authenticated user
# This might need tweaking when using external authentication schemes
   valid users = %S

# Un-comment the following and create the netlogon directory for Domain Logons
# (you need to configure Samba to act as a domain controller too.)
;[netlogon]
;   comment = Network Logon Service
;   path = /home/samba/netlogon
;   guest ok = yes
;   writable = no
;   share modes = no

# Un-comment the following and create the profiles directory to store
# users profiles (see the "logon path" option above)
# (you need to configure Samba to act as a domain controller too.)
# The path below should be writable by all users so that their
# profile directory may be created the first time they log on
;[profiles]
;   comment = Users profiles
;   path = /home/samba/profiles
;   guest ok = no
;   browseable = no
;   create mask = 0600
;   directory mask = 0700

[printers]
   comment = All Printers
   browseable = no
   path = /var/spool/samba
   printable = yes
   public = no
   writable = no
   create mode = 0700

[endro]
        comment = endro
        path = /home/endro/
        browseable = yes
        public = yes
        read only = no
        writable = yes
        guest ok = no

# Windows clients look for this share name as a source of downloadable
# printer drivers
[print$]
   comment = Printer Drivers
   path = /var/lib/samba/printers
   browseable = yes
   read only = yes
   guest ok = no
# Uncomment to allow remote administration of Windows print drivers.
# Replace 'ntadmin' with the name of the group your admin users are
# members of.
;   write list = root, @ntadmin

# A sample share for sharing your CD-ROM with others.
;[cdrom]
;   comment = Samba server's CD-ROM
;   writable = no
;   locking = no
;   path = /cdrom
;   public = yes

# The next two parameters show how to auto-mount a CD-ROM when the
#       cdrom share is accesed. For this to work /etc/fstab must contain
#       an entry like this:
#
#       /dev/scd0   /cdrom  iso9660 defaults,noauto,ro,user   0 0
#
# The CD-ROM gets unmounted automatically after the connection to the
#
# If you don't want to use auto-mounting/unmounting make sure the CD
#       is mounted on /cdrom
#
;   preexec = /bin/mount /cdrom
;   postexec = /bin/umount /cdrom

5.       Kemudian tekan ctrl + x untuk menyimpan.
6.       Lakukan restart samba agar berjalan dengan perintah #/etc/init/samba restart

KONFIGURASI SAMBA DEBIAN


 Masuk root, kemudian ketik #apt-get install samba
2.       Kemudian akan muncul pop up pilih “no”
3.       Setelah terinstal, kemudian kita konfigurasi sambanya ketikan #nano /etc/samba/smb.conf
4.       Isikan konfigurasi seperti ini :

#
# Sample configuration file for the Samba suite for Debian GNU/Linux.
#
#
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options most of which
# are not shown in this example
#
# Any line which starts with a ; (semi-colon) or a # (hash)
# is a comment and is ignored. In this example we will use a #
# for commentary and a ; for parts of the config file that you
# may wish to enable
#
# NOTE: Whenever you modify this file you should run the command
# "testparm" to check that you have not made any basic syntactic
# errors.
#

#======================= Global Settings =======================

[global]

## Browsing/Identification ###

# Change this to the workgroup/NT-domain name your Samba server will part of
   workgroup = WORKGROUP

# server string is the equivalent of the NT Description field
   server string = %h server

# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable its WINS Server
;   wins support = no

# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
;   wins server = w.x.y.z

# This will prevent nmbd to search for NetBIOS names through DNS.
   dns proxy = no

# What naming service and in what order should we use to resolve host names
# to IP addresses
;   name resolve order = lmhosts host wins bcast

#### Networking ####

# The specific set of interfaces / networks to bind to
# This can be either the interface name or an IP address/netmask;
# interface names are normally preferred
;   interfaces = 127.0.0.0/8 eth0

# Only bind to the named interfaces and/or networks; you must use the
# 'interfaces' option above to use this.
# It is recommended that you enable this feature if your Samba machine is
# not protected by a firewall or is a firewall itself.  However, this
# option cannot handle dynamic or non-broadcast interfaces correctly.
;   bind interfaces only = true



#### Debugging/Accounting ####

# This tells Samba to use a separate log file for each machine
# that connects
   log file = /var/log/samba/log.%m

# Put a capping on the size of the log files (in Kb).
   max log size = 1000

# If you want Samba to only log through syslog then set the following
# parameter to 'yes'.
;   syslog only = no

# We want Samba to log a minimum amount of information to syslog. Everything
# should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log
# through syslog you should set the following parameter to something higher.
   syslog = 0

# Do something sensible when Samba crashes: mail the admin a backtrace
   panic action = /usr/share/samba/panic-action %d


####### Authentication #######

# "security = user" is always a good idea. This will require a Unix account
# in this server for every user accessing the server. See
# /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/ServerType.html
# in the samba-doc package for details.
   security = share

# You may wish to use password encryption.  See the section on
# 'encrypt passwords' in the smb.conf(5) manpage before enabling.
   encrypt passwords = true

# If you are using encrypted passwords, Samba will need to know what
# password database type you are using. 
   passdb backend = tdbsam

   obey pam restrictions = yes

   guest account = endro
   invalid users = root

# This boolean parameter controls whether Samba attempts to sync the Unix
# password with the SMB password when the encrypted SMB password in the
# passdb is changed.
;   unix password sync = no

# For Unix password sync to work on a Debian GNU/Linux system, the following
# parameters must be set (thanks to Ian Kahan < for
# sending the correct chat script for the passwd program in Debian Sarge).
   passwd program = /usr/bin/passwd %u
   passwd chat = *Enter\snew\sUNIX\spassword:* %n\n *Retype\snew\sUNIX\spassword:* %n\n *password\supdated\ssuccessfully* .

# This boolean controls whether PAM will be used for password changes
# when requested by an SMB client instead of the program listed in
# 'passwd program'. The default is 'no'.
;   pam password change = no

########## Domains ###########

# Is this machine able to authenticate users. Both PDC and BDC
# must have this setting enabled. If you are the BDC you must
# change the 'domain master' setting to no
#
;   domain logons = yes
#
# The following setting only takes effect if 'domain logons' is set
# It specifies the location of the user's profile directory
# from the client point of view)
# The following required a [profiles] share to be setup on the
# samba server (see below)
;   logon path = \\%N\profiles\%U
# Another common choice is storing the profile in the user's home directory
;   logon path = \\%N\%U\profile

# The following setting only takes effect if 'domain logons' is set
# It specifies the location of a user's home directory (from the client
# point of view)
;   logon drive = H:
;   logon home = \\%N\%U

# The following setting only takes effect if 'domain logons' is set
# It specifies the script to run during logon. The script must be stored
# in the [netlogon] share
# NOTE: Must be store in 'DOS' file format convention
;   logon script = logon.cmd

# This allows Unix users to be created on the domain controller via the SAMR
# RPC pipe.  The example command creates a user account with a disabled Unix
# password; please adapt to your needs
; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u

########## Printing ##########

# If you want to automatically load your printer list rather
# than setting them up individually then you'll need this
;   load printers = yes

# lpr(ng) printing. You may wish to override the location of the
# printcap file
;   printing = bsd
;   printcap name = /etc/printcap

# CUPS printing.  See also the cupsaddsmb(8) manpage in the
# cupsys-client package.
;   printing = cups
;   printcap name = cups

# When using [print$], root is implicitly a 'printer admin', but you can
# also give this right to other users to add drivers and set printer
# properties
;   printer admin = @ntadmin


############ Misc ############

# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
;   include = /home/samba/etc/smb.conf.%m

# Most people will find that this option gives better performance.
# See smb.conf(5) and /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/speed.html
# for details
# You may want to add the following on a Linux system:
#         SO_RCVBUF=8192 SO_SNDBUF=8192
   socket options = TCP_NODELAY

# The following parameter is useful only if you have the linpopup package
# installed. The samba maintainer and the linpopup maintainer are
# working to ease installation and configuration of linpopup and samba.
;   message command = /bin/sh -c '/usr/bin/linpopup "%f" "%m" %s; rm %s' &

# Domain Master specifies Samba to be the Domain Master Browser. If this
# machine will be configured as a BDC (a secondary logon server), you
# must set this to 'no'; otherwise, the default behavior is recommended.
;   domain master = auto

# Some defaults for winbind (make sure you're not using the ranges
# for something else.)
;   idmap uid = 10000-20000
;   idmap gid = 10000-20000
;   template shell = /bin/bash
;
; The following was the default behaviour in sarge
; but samba upstream reverted the default because it might induce
; performance issues in large organizations
; See #368251 for some of the consequences of *not* having
; this setting and smb.conf(5) for all details
;
;   winbind enum groups = yes
;   winbind enum users = yes

#======================= Share Definitions =======================

[homes]
   comment = Home Directories
   browseable = no

# By default, the home directories are exported read-only. Change next
# parameter to 'yes' if you want to be able to write to them.
   writable = no

# File creation mask is set to 0700 for security reasons. If you want to
# create files with group=rw permissions, set next parameter to 0775.
   create mask = 0700

# Directory creation mask is set to 0700 for security reasons. If you want to
# create dirs. with group=rw permissions, set next parameter to 0775.
   directory mask = 0700

# Restrict access to home directories
# to the one of the authenticated user
# This might need tweaking when using external authentication schemes
   valid users = %S

# Un-comment the following and create the netlogon directory for Domain Logons
# (you need to configure Samba to act as a domain controller too.)
;[netlogon]
;   comment = Network Logon Service
;   path = /home/samba/netlogon
;   guest ok = yes
;   writable = no
;   share modes = no

# Un-comment the following and create the profiles directory to store
# users profiles (see the "logon path" option above)
# (you need to configure Samba to act as a domain controller too.)
# The path below should be writable by all users so that their
# profile directory may be created the first time they log on
;[profiles]
;   comment = Users profiles
;   path = /home/samba/profiles
;   guest ok = no
;   browseable = no
;   create mask = 0600
;   directory mask = 0700

[printers]
   comment = All Printers
   browseable = no
   path = /var/spool/samba
   printable = yes
   public = no
   writable = no
   create mode = 0700

[endro]
        comment = endro
        path = /home/endro/
        browseable = yes
        public = yes
        read only = no
        writable = yes
        guest ok = no

# Windows clients look for this share name as a source of downloadable
# printer drivers
[print$]
   comment = Printer Drivers
   path = /var/lib/samba/printers
   browseable = yes
   read only = yes
   guest ok = no
# Uncomment to allow remote administration of Windows print drivers.
# Replace 'ntadmin' with the name of the group your admin users are
# members of.
;   write list = root, @ntadmin

# A sample share for sharing your CD-ROM with others.
;[cdrom]
;   comment = Samba server's CD-ROM
;   writable = no
;   locking = no
;   path = /cdrom
;   public = yes

# The next two parameters show how to auto-mount a CD-ROM when the
#       cdrom share is accesed. For this to work /etc/fstab must contain
#       an entry like this:
#
#       /dev/scd0   /cdrom  iso9660 defaults,noauto,ro,user   0 0
#
# The CD-ROM gets unmounted automatically after the connection to the
#
# If you don't want to use auto-mounting/unmounting make sure the CD
#       is mounted on /cdrom
#
;   preexec = /bin/mount /cdrom
;   postexec = /bin/umount /cdrom

5.       Kemudian tekan ctrl + x untuk menyimpan.
6.       Lakukan restart samba agar berjalan dengan perintah #/etc/init/samba restart

 
Design by Free WordPress Themes | Bloggerized by Lasantha - Premium Blogger Themes | cheap international calls